AES unique system name for a cluster
We have four UAT nodes in a Cluster. The cluster has the same system pega_acceptance and there are different short descriptions for each node as given below. As per AES configuration guide AES uses this node short description to uniquely identify nodes in a cluster, so is this naming correct or the system name should be different for each node?
We have four UAT nodes in a Cluster. The cluster has the same system pega_acceptance and there are different short descriptions for each node as given below. As per AES configuration guide AES uses this node short description to uniquely identify nodes in a cluster, so is this naming correct or the system name should be different for each node?
| Node Name | System Name | Node ID | Node Short Description |
| prclt10427.ce.extranet | pega_acceptance | b10f104b3dbff8ec4e8277d6c8c1b232 | prclt10427.ce.extranet pega_acceptance 2016-01-12 13:26:07.439 GMT |
| prclt10426.ce.extranet | pega_acceptance | a3a1f8981567ecd1fcc2ef257de32186 | prclt10426.ce.extranet pega_acceptance 2016-01-11 12:14:17.039 GMT |
| prclt10369.atece.development | pega_acceptance | 425307c69ef79b70c7d24f52ef71158a | prclt10369.atece.development pega_acceptance 2016-01-08 13:03:30.002 GMT |
| prclt10367.atece.development | pega_acceptance | 5e875410b511e1b81590c03207267c72 |
prclt10367.atece.development pega_acceptance 2016-01-08 10:24:27.007 GMT |
Pegasystems Inc.
IN
Hi,
The Autonomic Event Services product (AES) produces reports about system performance by system name. If you have multiple unrelated systems that a single AES installation monitors, you need to provide a unique name for each system.
Also The system name is the same for all nodes that belong to that system. Each node also has a unique, system-generated node ID that identifies it and that derives in part from its system ID. Do not manually edit the node IDs
Hi,
The Autonomic Event Services product (AES) produces reports about system performance by system name. If you have multiple unrelated systems that a single AES installation monitors, you need to provide a unique name for each system.
Also The system name is the same for all nodes that belong to that system. Each node also has a unique, system-generated node ID that identifies it and that derives in part from its system ID. Do not manually edit the node IDs
Refer the below post
https://docs-previous.pega.com/changing-system-name
Thank You.
ING Bank
BE
We have four UAT nodes in a Cluster. All nodes in the cluster has the system name pega_acceptance and there are different short descriptions for each node.
As per AES configuration guide AES uses this node short description to uniquely identify nodes in a cluster. So this set up is working.