Enabling additional information in Pega0020 alerts
I'm attempting to debug a semi-inconsistent slow running connector. I'd want to enable the parameter output in the Pega0020 alert so I can see the request to the service and figure out is it's generating differently at times. I've attempted adding a number of DSS settings to the system to enable outputting the parameters directly in the alert but been unsuccessful thus far.
Here's the part of the alert where I'd like to see the [removed] bits.
pyQueryStringParameters=[removed];pyRequestDataList=[removed];EndPointURL=[removed];pyResourceParameters=[removed];pyHTTPStatusLine=[removed];Operation=[removed];pzResponseHeaderMap=[removed];SimulationActivity=[removed];pyStatusVal=[removed];responseCharset=[removed];skipBody=[removed];pyHTTPResponseCode=[removed];mapTo=[removed];MethodName=[removed];pyRequestParameters=[removed];Request=[removed];pyRequestData=[removed];PegaUnitClassOfServiceToBeSimulated=[removed];pyRequestHeaders=[removed];pyResourcePathParameters=[removed];pyStatusMsg=[removed];pyObjName=[removed];Parameter=[removed];PegaUnitServiceToBeSimulated=[removed];time=[removed]
Here's the DSS/prconfig settings I've tried:
alerts/connector/includeparameterpage/default true alerts/general/includeparameterpage/default true alerts/parameterpage/remotefiltertype allowed
I'm attempting to debug a semi-inconsistent slow running connector. I'd want to enable the parameter output in the Pega0020 alert so I can see the request to the service and figure out is it's generating differently at times. I've attempted adding a number of DSS settings to the system to enable outputting the parameters directly in the alert but been unsuccessful thus far.
Here's the part of the alert where I'd like to see the [removed] bits.
pyQueryStringParameters=[removed];pyRequestDataList=[removed];EndPointURL=[removed];pyResourceParameters=[removed];pyHTTPStatusLine=[removed];Operation=[removed];pzResponseHeaderMap=[removed];SimulationActivity=[removed];pyStatusVal=[removed];responseCharset=[removed];skipBody=[removed];pyHTTPResponseCode=[removed];mapTo=[removed];MethodName=[removed];pyRequestParameters=[removed];Request=[removed];pyRequestData=[removed];PegaUnitClassOfServiceToBeSimulated=[removed];pyRequestHeaders=[removed];pyResourcePathParameters=[removed];pyStatusMsg=[removed];pyObjName=[removed];Parameter=[removed];PegaUnitServiceToBeSimulated=[removed];time=[removed]
Here's the DSS/prconfig settings I've tried:
alerts/connector/includeparameterpage/default true alerts/general/includeparameterpage/default true alerts/parameterpage/remotefiltertype allowed
Am I missing something? Is there another setting that enables those values? Documentation on this is sparse and mostly related to removing information from alerts so I'm not exactly clear on what's required to get them to show up.
Thanks, -Ryan
Updated: 3 Nov 2020 11:45 EST
Selective Insurance
US
Here's the alerts I see in the system when the test service I created runs. It's pretty standard for any of our environments. I'm just unsure of how to enable the additional alert details for the Pega0020.
Here's the alerts I see in the system when the test service I created runs. It's pretty standard for any of our environments. I'm just unsure of how to enable the additional alert details for the Pega0020.
2020-11-03 16:38:47,369 GMT*8*PEGA0001*1314*1000*theplayground*NA*NA*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*rtaylor*Temp-Junkyard-Work*Junkyard:01.01.01*2b2dba56fa2030d85cc88d79d02570bc*Y*6*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*421*http-nio-8080-exec-10*PS2__TABTHREAD0*com.pega.pegarules.session.internal.engineinterface.service.HttpAPI*localhost| Proprietary information hidden*[email protected]*Rule-Obj-Activity:InitialProfileSetup*@BASECLASS DOUIACTION #20200813T080417.157 GMT Step: 45 Circum: 0*NA*****pxRDBIOElapsed=0.50;pxDeclExprCtxFreeUseCount=67;pxRDBIOCount=89;pxRunStreamCount=57;pxTotalReqCPU=0.61;pxRunModelCount=33;pxOutputBytes=550,135;pxRunWhenCount=484;pxDeclarativePageLoadElapsed=0.16;pxRulesExecuted=949;pxPropertyReadCount=1;pxOtherCount=664;pxInferGeneratedJavaCount=1;pxRDBRowWithStreamCount=91;pxDBInputBytes=9,157,536;pxTotalReqTime=1.31;pxActivityCount=108;pxAlertCount=1;pxOtherFromCacheCount=375;pxRDBWithoutStreamCount=5;pxRunOtherRuleCount=20;pxDeclarativeRulesInvokedCount=84;pxInteractions=1;pxLegacyRuleAPIUsedCount=14;pxRuleCount=47;pxDeclarativeRulesLookupCount=495;pxInputBytes=410;pxInferGeneratedJavaElapsed=0.00;pxDeclarativeRulesInvokedElapsed=0.03;pxRuleIOElapsed=0.03;pxRulesUsed=3,146;pxDeclarativePageLoadCount=17;pxDeclExprCtxSensUseCount=3;pxDeclarativeRulesLookupElapsed=0.03;pxProceduralRuleReadCount=11;pxRDBWithStreamCount=62;pxInferGeneratedJavaHLElapsed=0.02;pxRuleFromCacheCount=36;pxOtherIOElapsed=0.14;pxRuleBrowseElapsed=0.00;pxTrackedPropertyChangesCount=213;pxDBOutputBytes=5,232;pxDeclarativeRuleReadCount=2;pxRDBRowWithoutStreamCount=7;pxDeclarativeNtwksBuildHLElapsed=0.04;pxOtherIOCount=307;pxDeclarativeNtwksBuildConstElapsed=0.01;*NA*NA*NA*NA*NA*Format=harness;portalName=Developer;pzPostData=[removed];pyActivity=%40baseclass.doUIAction;contentID=37cdada0-d099-d454-1906-c3012b7b73dc;action=openRuleSpecific;tabIndex=2;dynamicContainerID=de12ecd7-b2b3-4849-bff1-ee2797014513;portalThreadName=OpenPortal_Developer;*HTTP interaction has exceeded the elapsed time alert threshold of 1000 ms: 1315 ms.* 2020-11-03 16:38:56,699 GMT*8*PEGA0020*1396*1000*theplayground*NA*NA*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*rtaylor*Temp-Junkyard-Work*Junkyard:01.01.01*2b2dba56fa2030d85cc88d79d02570bc*Y*13*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*422*http-nio-8080-exec-9*STANDARD*com.pega.pegarules.session.internal.mgmt.Executable*localhost| Proprietary information hidden*Activity=Pega-RunRecord.pzRunRecordExecute*Rule-Obj-Activity:pzRunRecordExecute*NA*0*****pxRDBIOElapsed=0.01;pxRDBIOCount=19;pxTotalReqCPU=0.05;pxRunModelCount=1;pxRunWhenCount=1;pxDeclarativePageLoadElapsed=0.02;pxConnectClientResponseElapsed=1.34;pxRulesExecuted=6;pxOtherCount=72;pxRDBRowWithStreamCount=16;pxDBInputBytes=81,700;pxTotalReqTime=1.40;pxActivityCount=4;pxAlertCount=1;pxOtherFromCacheCount=31;pxRDBWithoutStreamCount=2;pxConnectElapsed=1.40;pxDeclarativeRulesLookupCount=44;pxRulesUsed=6;pxDeclarativePageLoadCount=2;pxDeclarativeRulesLookupElapsed=0.00;pxRDBWithStreamCount=16;pxOtherIOElapsed=0.02;pxRDBRowWithoutStreamCount=2;pxDeclarativeNtwksBuildHLElapsed=0.00;pxOtherIOCount=43;pxConnectOutMapReqElapsed=0.00;pxDeclarativeNtwksBuildConstElapsed=0.00;pxConnectInMapReqElapsed=0.00;*Rule-Connect-REST*NA*Rule-Connect-REST*NA*doActivity Rule-Obj-Activity:Invoke;Connect-REST;RULE-OBJ-ACTIVITY TEMP-JUNKYARD-INT RUNSLOWWLY #20201027T202821.528 GMT Step: 3 Circum: 0;doActivity Rule-Obj-Activity:RunSlowwly;Java;6 additional frames in stack;*pyQueryStringParameters=[removed];pyRequestDataList=[removed];EndPointURL=[removed];pyResourceParameters=[removed];pyHTTPStatusLine=[removed];Operation=[removed];pzResponseHeaderMap=[removed];SimulationActivity=[removed];pyStatusVal=[removed];responseCharset=[removed];skipBody=[removed];pyHTTPResponseCode=[removed];mapTo=[removed];MethodName=[removed];pyRequestParameters=[removed];Request=[removed];pyRequestData=[removed];PegaUnitClassOfServiceToBeSimulated=[removed];pyRequestHeaders=[removed];pyResourcePathParameters=[removed];pyStatusMsg=[removed];pyObjName=[removed];Parameter=[removed];PegaUnitServiceToBeSimulated=[removed];time=[removed];*RULE-CONNECT-REST TEMP-JUNKYARD-INT-SLOWWLY-SLOWWLYAPI SLOWWLY #20201027T203155.555 GMT has exceeded the threshold of 1,000 ms: 1,396 ms;pxConnectOutMapReqElapsed=2;pxConnectClientResponseElapsed=1339;pxConnectInMapReqElapsed=3;* 2020-11-03 16:38:56,705 GMT*8*PEGA0001*1565*1000*theplayground*NA*NA*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*rtaylor*Temp-Junkyard-Work*Junkyard:01.01.01*2b2dba56fa2030d85cc88d79d02570bc*Y*13*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*423*http-nio-8080-exec-9*STANDARD*com.pega.pegarules.session.internal.engineinterface.service.HttpAPI*localhost| Proprietary information hidden*Activity=Pega-RunRecord.pzRunRecordExecute*Rule-Obj-Activity:pzRunRecordExecute*@BASECLASS ACTIVITYSTATUSNOCONTENTHANDLER #20190130T190245.729 GMT Step: 2 Circum: 0*0*****pxRunModelCount=4;pxOutputBytes=1,168;pxDeclarativePageLoadElapsed=0.02;pxRulesExecuted=23;pxJavaGenerateCount=1;pxJavaGenerateElapsed=0.01;pxRDBRowWithStreamCount=17;pxDBInputBytes=103,600;pxAlertCount=2;pxConnectElapsed=1.40;pxDeclarativeRulesLookupCount=55;pxInputBytes=180;pxConnectCount=1;pxDeclarativeRulesInvokedElapsed=0.00;pxRuleIOElapsed=0.03;pxDeclarativePageLoadCount=2;pxJavaAssembleHLElapsed=0.09;pxDeclarativeRulesLookupElapsed=0.00;pxProceduralRuleReadCount=2;pxTransientJavaAssembleCount=1;pxRDBRowWithoutStreamCount=3;pxConnectOutMapReqElapsed=0.00;pxJavaCompileCount=1;pxTransientJavaCompileCount=1;pxRDBIOElapsed=0.01;pxDeclExprCtxFreeUseCount=1;pxRDBIOCount=22;pxRunStreamCount=1;pxTotalReqCPU=0.20;pxRunWhenCount=3;pxConnectClientResponseElapsed=1.34;pxOtherCount=144;pxTotalReqTime=1.57;pxActivityCount=11;pxOtherFromCacheCount=71;pxRDBWithoutStreamCount=3;pxRunOtherRuleCount=1;pxDeclarativeRulesInvokedCount=3;pxInteractions=1;pxRuleCount=1;pxJavaCompileElapsed=0.08;pxRulesUsed=26;pxRDBWithStreamCount=17;pxOtherIOElapsed=0.03;pxTrackedPropertyChangesCount=4;pxDeclarativeNtwksBuildHLElapsed=0.01;pxOtherIOCount=78;pxDeclarativeNtwksBuildConstElapsed=0.00;pxConnectInMapReqElapsed=0.00;*NA*NA*NA*NA*NA*CalledFromThread=[removed];pzPrimaryPageName=[removed];pyActivity=Pega-RunRecord.pzRunRecordExecute;ThreadName=[removed];skipTrackerChanges=[removed];primaryPageClass=Pega-RunRecord;*HTTP interaction has exceeded the elapsed time alert threshold of 1000 ms: 1565 ms.* 2020-11-03 16:39:00,571 GMT*8*PEGA0020*1252*1000*theplayground*NA*NA*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*rtaylor*Temp-Junkyard-Work*Junkyard:01.01.01*2b2dba56fa2030d85cc88d79d02570bc*Y*19*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*424*http-nio-8080-exec-6*STANDARD*com.pega.pegarules.session.internal.mgmt.Executable*localhost| Proprietary information hidden*Activity=Pega-RunRecord.pzRunRecordExecute*Rule-Obj-Activity:pzRunRecordExecute*NA*0*****pxConnectElapsed=1.25;pxTotalReqCPU=0.02;pxRulesUsed=3;pxRunWhenCount=1;pxTotalReqTime=1.25;pxActivityCount=2;pxConnectClientResponseElapsed=1.25;pxRulesExecuted=3;pxAlertCount=1;pxConnectInMapReqElapsed=0.00;*Rule-Connect-REST*NA*Rule-Connect-REST*NA*doActivity Rule-Obj-Activity:Invoke;Connect-REST;RULE-OBJ-ACTIVITY TEMP-JUNKYARD-INT RUNSLOWWLY #20201027T202821.528 GMT Step: 3 Circum: 0;doActivity Rule-Obj-Activity:RunSlowwly;Java;6 additional frames in stack;*pyQueryStringParameters=[removed];pyRequestDataList=[removed];EndPointURL=[removed];pyResourceParameters=[removed];pyHTTPStatusLine=[removed];Operation=[removed];pzResponseHeaderMap=[removed];SimulationActivity=[removed];pyStatusVal=[removed];responseCharset=[removed];skipBody=[removed];pyHTTPResponseCode=[removed];mapTo=[removed];MethodName=[removed];pyRequestParameters=[removed];Request=[removed];pyRequestData=[removed];PegaUnitClassOfServiceToBeSimulated=[removed];pyRequestHeaders=[removed];pyResourcePathParameters=[removed];pyStatusMsg=[removed];pyObjName=[removed];Parameter=[removed];PegaUnitServiceToBeSimulated=[removed];time=[removed];*RULE-CONNECT-REST TEMP-JUNKYARD-INT-SLOWWLY-SLOWWLYAPI SLOWWLY #20201027T203155.555 GMT has exceeded the threshold of 1,000 ms: 1,252 ms;pxConnectOutMapReqElapsed=0;pxConnectClientResponseElapsed=1248;pxConnectInMapReqElapsed=1;* 2020-11-03 16:39:00,573 GMT*8*PEGA0001*1314*1000*theplayground*NA*NA*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*rtaylor*Temp-Junkyard-Work*Junkyard:01.01.01*2b2dba56fa2030d85cc88d79d02570bc*Y*19*HTQ9RLAYARXQZDWR12WO3X8DOMXL2VOABA*425*http-nio-8080-exec-6*STANDARD*com.pega.pegarules.session.internal.engineinterface.service.HttpAPI*localhost| Proprietary information hidden*Activity=Pega-RunRecord.pzRunRecordExecute*Rule-Obj-Activity:pzRunRecordExecute*@BASECLASS ACTIVITYSTATUSNOCONTENTHANDLER #20190130T190245.729 GMT Step: 2 Circum: 0*0*****pxRDBIOElapsed=0.00;pxDeclExprCtxFreeUseCount=1;pxRDBIOCount=1;pxRunStreamCount=1;pxTotalReqCPU=0.06;pxRunModelCount=3;pxOutputBytes=1,168;pxRunWhenCount=3;pxConnectClientResponseElapsed=1.25;pxRulesExecuted=20;pxJavaGenerateCount=1;pxOtherCount=2;pxJavaGenerateElapsed=0.01;pxDBInputBytes=15,208;pxTotalReqTime=1.31;pxActivityCount=9;pxAlertCount=2;pxOtherFromCacheCount=2;pxRDBWithoutStreamCount=1;pxRunOtherRuleCount=1;pxConnectElapsed=1.25;pxDeclarativeRulesInvokedCount=3;pxInteractions=1;pxRuleCount=1;pxInputBytes=180;pxJavaCompileElapsed=0.04;pxConnectCount=1;pxDeclarativeRulesInvokedElapsed=0.00;pxRuleIOElapsed=0.00;pxRulesUsed=23;pxJavaAssembleHLElapsed=0.05;pxRuleFromCacheCount=1;pxOtherIOElapsed=0.00;pxTransientJavaAssembleCount=1;pxTrackedPropertyChangesCount=4;pxRDBRowWithoutStreamCount=1;pxOtherIOCount=1;pxJavaCompileCount=1;pxTransientJavaCompileCount=1;pxConnectInMapReqElapsed=0.00;*NA*NA*NA*NA*NA*CalledFromThread=[removed];pzPrimaryPageName=[removed];pyActivity=Pega-RunRecord.pzRunRecordExecute;ThreadName=[removed];skipTrackerChanges=[removed];primaryPageClass=Pega-RunRecord;*HTTP interaction has exceeded the elapsed time alert threshold of 1000 ms: 1314 ms.*
Pegasystems Inc.
FR
Here is the description for Pega0020: https://community.pega.com/knowledgebase/articles/pega0020-alert-total-connect-interaction-time-exceeds-limit
It looks like the time is spent due to client response:
has exceeded the threshold of 1,000 ms: 1,396 ms;pxConnectOutMapReqElapsed=2;pxConnectClientResponseElapsed=1339;pxConnectInMapReqElapsed=3
has exceeded the threshold of 1,000 ms: 1,252 ms;pxConnectOutMapReqElapsed=0;pxConnectClientResponseElapsed=1248;pxConnectInMapReqElapsed=1
Updated: 3 Nov 2020 13:10 EST
Selective Insurance
US
Yes, I know. That's not what I'm trying to figure out. I want to enable the system to output the service parameters/request/response directly in the alert. My understanding it that the prconfig/DSS settings below should enable that functionality however they did not work as expected.
alerts/connector/includeparameterpage/default true
alerts/general/includeparameterpage/default true
alerts/parameterpage/remotefiltertype allowed
Specifically, I would like to see the following information:
pyQueryStringParameters=[removed];
pyRequestDataList=[removed];
pzResponseHeaderMap=[removed];
pyRequestParameters=[removed];
Request=[removed];
pyRequestData=[removed];
Pegasystems Inc.
US
How exactly have you configured these in either prconfig or DSS? They will differ depending on which area you place them. For example, alerts/general/includeparameterpage/default does not actually work for either location. In prconfig.xml it should be: alerts/general/includeparameterpage
and as a DSS it should be: prconfig/alerts/general/includeparameterpage/default
With Pega-Engine as the owning ruleset.
prconfig entries shouldn't include prconfig or default in the setting, and DSS entries require both if they are settings that can also be used in the prconfig file (default could be replaced by something else, but that's not relevant at the moment).
Updated: 11 Nov 2020 10:52 EST
Selective Insurance
US
I have the setting below configured but I'm not seeing any change in the Pega0020 alerts in the log output (after restarting)
My image was removed, the DSS settings are:
|
Pega-Engine • Prconfig/alerts/parameterpage/remotefiltertype/default |
allowed |
|
Pega-Engine • prconfig/alerts/general/includeparameterpage/default |
true |
Pegasystems Inc.
US
So these will work on your alerts sent to aes
alerts/parameterpage/remoteFilterType this can be set to either allowed or obfuscate.
Given that you set one of the following
alerts/parameterpage/allowedKeywords
alerts/parameterpage/obfuscateKeywords
Recommend that you use allowed.
The Data Security section here says more about this (Same in PDC as AES as far as your needs go) and has a list of the default allowed keywords. Add yours to the list.
set this
alerts/general/includeparameterpage which you have